Skip to main content

Address Resolution Protocol(ARP)

 

Address Resolution Protocol


 - Address Resolution Protocol (ARP) is a protocol for mapping an Internet Protocol address (IP address) to a physical machine address that is recognized in the local network. For example, in IP Version 4, the most common level of IP in use today, an address is 32 bits long. In an Ethernet local area network, however, addresses for attached devices are 48 bits long. (The physical machine address is also known as a Media Access Control or MAC address.) A table, usually called the ARP cache, is used to maintain a correlation between each MAC address and its corresponding IP address. ARP provides the protocol rules for making this correlation and providing address conversion in both directions. How ARP Works

When an incoming packet destined for a host machine on a particular local area network arrives at a gateway, the gateway asks the ARP program to find a physical host or MAC address that matches the IP address. The ARP program looks in the ARP cache and, if it finds the address, provides it so that the packet can be converted to the right packet length and format and sent to the machine. If no entry is found for the IP address, ARP broadcasts a request packet in a special format to all the machines on the LAN to see if one machine knows that it has that IP address associated with it. A machine that recognizes the IP address as its own returns a reply so indicating. ARP updates the ARP cache for future reference and then sends the packet to the MAC address that replied. Since protocol details differ for each type of local area network, there are separate ARP Requests for Comments (RFC) for Ethernet, ATM, Fiber Distributed-Data Interface, HIPPI, and other protocols. There is a Reverse ARP (RARP) for host machines that don't know their IP address. RARP enables them to request their IP address from the gateway's ARP cache.

Comments

Popular posts from this blog

Recreating a missing VMFS datastore partition in VMware vSphere 5.x and 6.x

    Symptoms A datastore has become inaccessible. A VMFS partition table is missing.   Purpose The partition table is required only during a rescan. This means that the datastore may become inaccessible on a host during a rescan if the VMFS partition was deleted after the last rescan. The partition table is physically located on the LUN, so all vSphere hosts that have access to this LUN can see the change has taken place. However, only the hosts that do a rescan will be affected.   This article provides information on: Determining whether this is the same problem Resolving the problem   Cause This issue occurs because the VMFS partition can be deleted by deleting the datastore from the vSphere Client. This is prevented by the software, if the datastore is in use. It can also happen if a physical server has access to the LUN on the SAN and does an install, for example.   Resolution To resolve this issue: Run the  partedUtil  command on the host with the issues and verify if your output

ما هى ال FSMO Roles

  بأختصار ال FSMO Roles هى اختصار ل Flexible Single Operation Master و هى عباره عن 5 Roles فى ال Active Directory و هما بينقسموا لقسمين A - Forest Roles 1- Schema Master Role و هى ال Role اللى بتتحكم فى ال schema و بيكون فى Schema Master Role واحد فى ال Forest بيكون موجود على Domain Controller و بيتم التحكم فيها من خلال ال Active Directory Schema Snap in in MMC بس بعد ما يتعمل Schema Register بواسطه الامر التالى من ال Cmd regsvr32 schmmgmt.dll 2-Domin Naming Master و هى ال Role المسئوله عن تسميه ال Domains و بتتأكد ان مفيش 2 Domain ليهم نفس الاسم فى ال Forest و بيتم التحكم فيها من خلال ال Active Directory Domains & Trusts B- Domain Roles 1-PDC Emulator و هى ال Role اللى بتتحكم فى ال Password change فى ال domain و بتتحكم فى ال time synchronization و هى تعتبر المكان الافتراضى لل GPO's و هى تعتبر Domain Role مش زى الاتنين الاولانيين و بيتم التحكم فيها من خلال ال Active directory Users & Computers عن طريق عمل كليك يمين على اسم الدومين و نختار operations master فى تاب ال PDC Emu

Unlock the VMware VM vmdk file

  Unlock the VMware VM vmdk file Kill -9 PID Sometimes a file or set of files in a VMFS become locked and any attempts to edit them or delete will give a device or resource busy error, even though the vm associated with the files is not running. If the vm is running then you would need to stop the vm to manipulate the files. If you know that the vm is stopped then you need to find the ESX server that has the files locked and then stop the process that is locking the file(s). 1. Logon to the ESX host where the VM was last known to be running. 2.  vmkfstools -D /vmfs/volumes/path/to/file  to dump information on the file into /var/log/vmkernel 3.  less /var/log/vmkernel  and scroll to the bottom, you will see output like below: a. Nov 29 15:49:17 vm22 vmkernel: 2:00:15:18.435 cpu6:1038)FS3: 130: <START vmware-16.log> b. Nov 29 15:49:17 vm22 vmkernel: 2:00:15:18.435 cpu6:1038)Lock [type 10c00001 offset 30439424 v 21, hb offset 4154368 c. Nov 29 15:49:17 vm22 vmkernel: gen 664